Game Console Instructions
|
Your game console or network TV device will not work on Mount Marty Wireless. Following are the
Ethernet/Wired instructions. You will need to provide your own
Cat5e patch cable. After you have verified that you have a network cable,
connect one end into the Ethernet card located in your console and the other
into the network jack located in your room. Typically, this jack will be blue in
color and will be labeled with a number, such as 205A. Once connected, make sure
to register your device.
XBox Connection Instructions
Turn on your XBox console with no game disc in the disc tray.
From the XBox Dashboard, choose "Settings".
From the Settings screen, select "Network Settings".
The MAC address is the 12-digit number at the bottom-right corner of the Network
Settings screen.
Once you have the MAC address, you may "proceed to the game console registration
page and register your Xbox".
--------------------------------------------------------------------------------
XBox 360 NXE Dashboard
Turn on your Xbox 360 console.
Scroll Down (if necessary) to "My Xbox"
Go all the way to the right and select "System Settings"
On the new screen, select "Network Settings"
Select "Configure Network"
Under "Basic Settings" check to make sure "IP Settings" is on "Automatic"
Scroll to the right to select the "Additional Settings" Tab.
Scroll down and select the second item "Advanced Settings"
Towards the bottom of the screen you should see "Wired MAC Address." the MAC
Address is the number below this.
Once you have the MAC address, you may "proceed to the game console registration
page and register your Xbox360 NXE".
--------------------------------------------------------------------------------
XBox 360 Old Dashboard(Pre-NXE)
Turn on your XBox360 console.
Go to the System area of the Xbox Dashboard and select "Network Settings".
Select "Edit Settings".
From "Additional Settings", select "Advanced Settings".
At the bottom of this screen you'll see a heading called "Wired MAC Address".
The MAC address is the 12-digit number.
Once you have the MAC address, you may "proceed to the game console registration
page and register your Xbox360".
--------------------------------------------------------------------------------
Playstation 2
Turn on the PlayStation 2 and load the Network Adaptor Startup Disc.
Once it has loaded, select "ISP Setup" and press X.
The "ISP SETUP" will begin to load, and you will be presented with a license
agreement. Select "Agree" and press X to continue.
For connection type, choose "Local Area Network (LAN)" and press X to continue.
Select "Automatic Configuration" and press X to continue.
At the "connection test" screen, select "Advanced" and press X to continue.
At the "Advanced Broadband Settings" screen, make sure "Automatic" is selected.
While you are at this screen, make note of the MAC Address at the bottom. You
will need this number to register your game console.
Once you have the MAC address, you may "proceed to the game console registration
page and register your Playstation 2".
--------------------------------------------------------------------------------
Playstation 3
Turn on the PlayStation 3 console.
Once the PlayStation 3 operating system has loaded, select "Settings".
Once you are in "Settings" select "Network Settings".
When the "Network Settings" list appears, select the first option which is
titled "Settings and Connection Status List".
The physical address will be listed under "MAC Address." Write this number down
.
Once you have the MAC address, you may "proceed to the game console registration
page and register your Playstation 3".
--------------------------------------------------------------------------------
Nintendo Wii
From the Wii Channel menu, select "Wii Settings" (the round button on the
bottom-left of the screen with "Wii" on it).
Select "Internet," then "Console Settings."
The MAC address of the Wii console is displayed on the first line.
Once you have the MAC address, you may "proceed to the game console registration
page and register your Nintendo Wii".
--------------------------------------------------------------------------------
Google TV
Connect your Sony Google TV with a CAT 5/6 ethernet cable to the jack in your
room. Note: Google TV is not supported on the "Wireless"
Open your Google Chrome browser and try to go to www.facebook.com
The web browser should be redirected to RezNet login page.
On the left side of the webpage, enter your SIU network ID and password to login.
After successful login, you should now be able to use your Sony Google TV.
Once you have the MAC address, you may "proceed to the game console registration
page and register your Google TV".
--------------------------------------------------------------------------------
Apple TV
Go to the main menu on your Apple TV, and select "Settings."
In the Settings Menu, select "About."
Here you can find your MAC Address, listed as either the "Wireless ID" or
"Ethernet ID" (depending on the connection you are using). Once you have the MAC
address, you may "proceed to the game console registration page and register
your Apple TV".
Once you have the MAC address, you may "proceed to the game console registration
page and register your Apple TV".
--------------------------------------------------------------------------------
For devices not listed here please perform a google search for instructions.
|
